ISG Uniball ball valves

ISG UNIBALL floating, reduced ball valve (UBF) [7.10/7.11]

Size range: DN 10-200  Pressure rating: PN 16/25/40 *

Datasheet

CE / PED

7.10-ISG UNIBALL floating, reduced ball valve (UBF)

Az ISG UNIBALL® ball valves have welded body design. Depending on the material quality of main components, there is a carbon steel and incorrodible design with reduced or full bore cross section.

The stems are sealed with 2 "O„-rings. The material quality of "O„-rings varies depending on the medium:
• 
EPDM: water, sewage, water-based chemicals, synthetic detergents (Tmax: 130°C)
• 
Viton: oil, gasoline, natural gas, PB gas, normal and high temperature oils, greases
• 
AFLAS (TFE/P): due to its higher thermal resistance, mainly raised high water, water vapor (Tmax: 200°C)

Flanged (UBF-F/R): DN10-100 PN40; DN65-250 PN16; DN125-250 PN25
Weld-on (UBF-W/R): DN10-100 PN40; DN125-250 PN25
Inner threaded (UBF-T/R): DN10-100 PN40
External threaded (UBF-S/R): DN10-50 PN40

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

The action of ball valves can be manual or machine-made. The machine-made action can be pneumatic or electrical. ISG UNIBALL floating ball valves can be produced normally with 3 different end connection: threaded, weld-on and flanged, or on demand with their variation as well.

ISG UNIBALL floating, full bore ball valve (UBF) [7.12/7.13]

Size range: DN 10-250  Pressure rating: PN 16/25/40 *

Datasheet

CE / PED

7.12-ISG UNIBALL floating, full bore ball valve (UBF)

Az ISG UNIBALL® ball valves have welded body design. Depending on the material quality of main components, there is a carbon steel and incorrodible design with reduced or full bore cross section.

The stems are sealed with 2 "O„-rings. The material quality of "O„-rings varies depending on the medium:
• 
EPDM: water, sewage, water-based chemicals, synthetic detergents (Tmax: 130°C)
• 
Viton: oil, gasoline, natural gas, PB gas, normal and high temperature oils, greases
• 
AFLAS (TFE/P): due to its higher thermal resistance, mainly raised high water, water vapor (Tmax: 200°C)

Flanged (UBF-F/F): DN10-100 PN40; DN65-200 PN16; DN125-200 PN25
Weld on (UBF-W/F): DN10-100 PN40; DN125-200 PN25
Inner threaded (UBF-T/F): DN10-100 PN40
External threaded (UBF-S/F): DN10-50 PN40

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

- DN10-150 hand operated (manual)
- DN200 gear

On demand, any nominal size can be produced with gear preparation.

ISG UNIBALL floating 3-way ball valve (UBF3) [7.14]

Size range: DN 10-100  Pressure rating: PN 16/40

Datasheet

CE / PED

7.14-ISG UNIBALL floating 3-way ball valve (UBF3)

At function, we distinguish between "L-rotary" and "Trotating" versions. The "T-rotating" can also be used for directional change and mixing, with "L-rotating" only for directional change.

Az ISG UNIBALL® ball valves have welded body design. Depending on the material quality of main components, there is a carbon steel and incorrodible design with reduced or full bore cross section.

The stems are sealed with 2 "O„-rings. The material quality of "O„-rings varies depending on the medium:
• 
EPDM: water, sewage, water-based chemicals, synthetic detergents (Tmax: 130°C)
• 
Viton: oil, gasoline, natural gas, PB gas, normal and high temperature oils, greases
• 
AFLAS (TFE/P): due to its higher thermal resistance, mainly raised high water, water vapor (Tmax: 200°C)

DN10-100 PN40; DN65-100 PN16 in case of flanged type

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

- hand lever

ISG UNIBALL floating, heating jacket ball valve (UBFH) [7.15]

Size range: DN 10-100  Pressure rating: PN 16/40

Datasheet

CE / PED

7.15-ISG UNIBALL floating, heating jacket ball valve (UBFH)

ISG UNIBALL floating ball valve with heating jacket is basically a standardISG UNIBALL floating ball valve for which a heating jacket is built.

ISG UNIBALL® ball valves have welded body design. Depending on the material quality of main components, there is a carbon steel and incorrodible design with reduced or full bore cross section.

The stems are sealed with 2 "O„-rings. The material quality of "O„-rings varies depending on the medium:
• 
EPDM: water, sewage, water-based chemicals, synthetic detergents (Tmax: 130°C)
• 
Viton: oil, gasoline, natural gas, PB gas, normal and high temperature oils, greases
• 
AFLAS (TFE/P): due to its higher thermal resistance, mainly raised high water, water vapor (Tmax: 200°C)

DN10-100 PN40; DN65-100 PN16  in case of flanged type

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

- hand lever

ISG UNIBALL floating drilled ball valve (UBFD) [7.16]

Size range: DN 25-100  Pressure rating: PN 40

Datasheet

CE / PED

7.16-ISG UNIBALL floating drilled ball valve (UBFD)

The main technical parameter of drilled ball valves are the same as the other ISG UNIBALL floating ball valves. It has full bore crosssection; it lets through the drilling according to nominal diameter. The threaded clamping sleeve of the drill can be modified as necessary to the drill type. It can be opened or closed with imbus key. The sealing system of the operating part can be doubled with end cap. The welding of this end it can be created a full welded system. The low construction height allows the ball valve to have homogeneous, equivalent insulation with the pipeline.

The stems are sealed with 2 "O„-rings. The material quality of "O„-rings varies depending on the medium:
• 
EPDM: water, sewage, water-based chemicals, synthetic detergents (Tmax: 130°C)
• 
Viton: oil, gasoline, natural gas, PB gas, normal and high temperature oils, greases
• 
AFLAS (TFE/P): due to its higher thermal resistance, mainly raised high water, water vapor (Tmax: 200°C)

DN25-100 PN40

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

It can be opened or closed with imbus key.

ISG UNIBALL floating isolated ball valve (UBFI) [7.17]

Size range: DN 10-150  Pressure rating: PN 16/25/40

Datasheet

CE / PED

7.17-ISG UNIBALL floating isolated ball valve (UBFI)

Az ISG UNIBALL® floating isolated ball valve is an ISG UNIBALL® floating ball valve with extended operating system. The extended operating element allows the ball valve to have equivalent insulation with the pipeline. Firstly it is used in central heating system. But it can be used everywhere to keep the working temperature of flow. End connection possibilities, size and pressure range, technical parameters (except heights) are the same as ISG UNIBALL floating ball valve (7.10/7.11 and 7.12/7.13).

The stems are sealed with 2 "O„-rings. The material quality of "O„-rings varies depending on the medium:
• 
EPDM: water, sewage, water-based chemicals, synthetic detergents (Tmax: 130°C)
• 
Viton: oil, gasoline, natural gas, PB gas, normal and high temperature oils, greases
• 
AFLAS (TFE/P): due to its higher thermal resistance, mainly raised high water, water vapor (Tmax: 200°C)

- Flanged (UBF-F/R): DN10-100 PN40; DN65-250 PN16; DN125-250 PN25
- Weld-on (UBF-W/R): DN10-100 PN40; DN125-250 PN25
- Inner threaded (UBF-T/R): DN10-100 PN40
- External threaded (UBF-S/R): DN10-50 PN40

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

- DN10-200 hand bar
- DN250 gear box
- On demand, any nominal size can be produced with gear box.

ISG UNIBALL floating ball valve with packing-gland (UBFS) [7.18]

Size range: DN 10-250  Pressure rating: PN 16/25/40

Datasheet

CE / PED

7.18-ISG UNIBALL floating ball valve with packing-gland (UBFS)

ISG UNIBALL® floating ball valve with packing-gland has difference in sealing system from the standard version ofISG UNIBALL floating ball valve, the sealing is done using a teflon tape, not an „O”-ring.

Applications: Within the specified temperature and pressure range for cold and hot water, steam, air, oil, petrol, natural and PB gas, and other petrochemical products. End connection possibilities, size and pressure range, technical parameters are the same asISG UNIBALL® floating ball valve. (7.10/7.11 and 7.12/7.13)

- Flanged (UBF-F/R): DN10-100 PN40; DN65-250 PN16; DN125-250 PN25
- Weld-on (UBF-W/R): DN10-100 PN40; DN125-250 PN25
- Inner threaded (UBF-T/R): DN10-100 PN40
- External threaded (UBF-S/R): DN10-50 PN40

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

- DN10-200 hand bar
- DN250 gear box
- On demand, any nominal size can be produced with gear box.

ISG UNIBALL floating ground-mounted ball valve (UBFU) [7.19]

Size range: DN 25-250  Pressure rating: PN 25/40

Datasheet

CE / PED

7.19-ISG UNIBALL floating ground-mounted ball valve (UBFU)

ISG UNIBALL floating, ground-mounted ball valve is a modified ISG UNIBALL ball valve, which can be constructed between ground conductors resulting from its design. Working temperature, material according to 7.00

Reduced bore: DN25-100 PN40; DN125-250 PN25
Full bore: DN25-80 PN40; DN100-200 PN25

  Carbon steel type Stainless steel type
Body: P235GH/P265GH 1.4301/1.4571
Sleeve: 1.4301 1.4301/1.4571
Ball: 1.4301 1.4301
Stem: 1.4021 1.4301/1.4571
Stem Sealing: EPDM/AFLAS/VITON EPDM/AFLAS/VITON
End connection: P235GH/P265GH: welded,
threaded P250GH: flanged
1.4301/1.4571:
Weld-on, threaded, flanged

- DN10-200 hand bar
- DN250 gear box
- On demand, any nominal size can be produced with gear box.

ISG UNIBALL® trunnion ball valve (UBT) [7.20]

Size range: DN 100-500  Pressure rating: PN 16/25/40

Datasheet

Catalogue

CE / PED

7.20-ISG UNIBALL® trunnion ball valve (UBT)

ISG UNIBALL ® trunnion ball valve is an improved version of ISG UNIBALL ® floating ball valve. There is a significant difference between the double bearing.

Advantages:
- Two-sided closure
- Moderate operating torque
- To assemble
- Favorable flowing conditions
- Multifunctional armature

(For more details see "ISG UNIBALL® Trunnion Ball Valve" catalogue)

Size range: DN100-500 Pressure rating: PN16/25

Body: P265GH
Sleeve: 1.4021
Ball: SS304
Stem: 1.4021
Stem holder: 1.4021
End connection: P265GH
Locking ring: PTFE+25%C
Stem Sealing: AFLAS (TFE/P), EPDM, VITON

- gearbox

Depending on sealing:

+30°C - 200 °C